https://kandepet.com/tag/firmware/Recent content in firmware on Deepak KandepetHugoen-USFri, 02 Jun 2017 00:26:27 +0000https://kandepet.com/portfolio/flashware-firmware-attiny-based-flashlights/Fri, 02 Jun 2017 00:26:27 +0000https://kandepet.com/portfolio/flashware-firmware-attiny-based-flashlights/<p><a href="https://github.com/Kandepet/FlashWare">FlashWare</a> is a firmware for my custom LED flashlight running on a 18350/18650 batterys with A17DD-L FET+1 Driver.</p> <p>Features:</p> <ul> <li>It is based on ToyKeepers BLF-A6 firmware.</li> <li>Currently only supports ATTiny13A.</li> <li>Dual channel support only (FET &amp; 7135)</li> <li>Uses Fast Pulse Width Modulation</li> <li>Supports Off-Time Capacitor for mode selection.</li> <li>Modes: <ul> <li>Regular Modes: Moonlight, Low, Medium, Turbo</li> <li>Special Modes: STROBE, BIKING_STROBE, BATTCHECK</li> </ul> </li> <li>TURBO mode drops down to Medium after 45 seconds.</li> <li>Battery Check mode blinks the light 0-10 times to display the state of the battery.</li> <li>Mode memory: Last used mode saved to EEPROM. Next start always starts at previous saved mode.</li> <li>Voltage monitoring supported to drop flashlight output when battery voltage is low. Low power cutoff switches off the flashlight when voltage drops below 2.7V.</li> </ul> <p>Github: <a href="https://github.com/Kandepet/FlashWare">https://github.com/Kandepet/FlashWare</a></p>