Projects on Deepak Kandepet

PhotoOrganizer

Mon, 05 Jun 2017 23:30:53 +0000

Script for organizing photos with duplicate detection (using PHash and BK Trees)

More details here.

Ruby ImageSimilarity Library

Mon, 05 Jun 2017 21:42:55 +0000

Ruby binding to image comparison algorithms (in C++ & Ruby)

Ruby bindings to the following image comparison algorithms. See this article for more information. Github link.

Average Hash
pHash
Color Histogram
Multiresolution Haar wavelet decomposition

OctoFoo

Mon, 05 Jun 2017 20:07:24 +0000

Octofoo is a light and easy static blog/website generator written in PHP. It converts Markdown content, merges it with Twig layouts and generates static HTML files. It can also deploy these static files to github pages if you are publishing a blog.

OctoFoo is a light and easy static website generator written in PHP. THis is a heavily hacked fork of PHPoole by Arnaud Ligny (https://github.com/Narno/PHPoole). It takes your content (written in Markdown format), merges it with layouts (Twig templates) and generates static HTML files that can be used for any website or blog. It also has the ability to deploy the static HTML directly to github pages.

HackerNews in PHP

Mon, 05 Jun 2017 18:22:49 +0000

A clone of Hackernews written in PHP. GitHub Link.

Features

Submit stories or ask questions.
Recursive comments
Vote on questions and comments
Stories are ranked based on user votes using an algorithm similar to hacker news ranking.

Screen shots

Front Page

Comments

KickFaster

Fri, 02 Jun 2017 22:56:55 +0000

Missed out on the super-crazy-early-early-bird pledge on Kickstarter? Paying more $$ because you were late by few minutes? Use Kick Faster to track unavailable kickstarter pledges and get notified as soon as they become available.

Screenshots

FlashWare - A firmware for ATTiny based flashlights

Fri, 02 Jun 2017 00:26:27 +0000

FlashWare is a firmware for my custom LED flashlight running on a 18350/18650 batterys with A17DD-L FET+1 Driver.

Features:

It is based on ToyKeepers BLF-A6 firmware.
Currently only supports ATTiny13A.
Dual channel support only (FET & 7135)
Uses Fast Pulse Width Modulation
Supports Off-Time Capacitor for mode selection.
Modes:
- Regular Modes: Moonlight, Low, Medium, Turbo
- Special Modes: STROBE, BIKING_STROBE, BATTCHECK
TURBO mode drops down to Medium after 45 seconds.
Battery Check mode blinks the light 0-10 times to display the state of the battery.
Mode memory: Last used mode saved to EEPROM. Next start always starts at previous saved mode.
Voltage monitoring supported to drop flashlight output when battery voltage is low. Low power cutoff switches off the flashlight when voltage drops below 2.7V.

Github: https://github.com/Kandepet/FlashWare

Katana STL slicer

Thu, 01 Jun 2017 22:46:25 +0000

Katana is an experimental stl slicer and gcode generator for reprap 3D printers. Written in C++, Katana is based on schlizzer, written by Paul Geisler.

Usage: ./katana inputfile.stl outputfile.gcode

Important features missing w.r.t Slic3r:

No discrimination of ‘solid’ and ‘fill’ areas. They are handled equally with fill_density=1.
Only ‘rectilinear’ fill pattern supported.
No contour correction of perimeter and infill, so the object exceeds the specified .stl
Bad route planning leading to bad movement order with useless many and long travels
Even worse planning for ’non manifold’ objects (most of thingyverse i guess..)
No brim, skirt, cooling etc.
No automatic placement and z leveling
Generated Gcode need to be extended before printing

Github: https://github.com/Kandepet/katana